5kA maximum output current (higher overload currents for 2s)
Multi-function digital timing system
Digital true RMS memory ammeter
Solid state switching
200A, 2000A and 5000A loading units
Three range outputs on loading units
Rugged, compact design
Optional trolley mounting of system
Secondary injection up to 100A
Auxiliary metering input
Direct reading CT ratio and polarity
The PCU1-SP mk2 is a medium powered primary current injection set offering output currents up to 5000A (11.5kVA for 40seconds). The system consists of a separate control unit containing all metering and control functions and a loading unit, such as the NLU200, NLU2000 or the NLU5000, that provides the high current output. The PCU1-SP mk2 are ideally suited to primary current injection, stability testing and circuit breaker testing. In addition, the SP version offers direct-reading CT ratio and polarity tests and a 100A secondary injection output. Two loading units are available, delivering a maximum output current of 2000A or 5000A. Each loading unit has three output taps to allow for a wide range of load impedances. For example, the NLU5000 may be configured to either give a maximum current of 5000A on the 2.3V range, 2500A on the 4.6V range or 1250A on the 9.2V range.
*The above is an image of the PCU1-SP and Loading Unit
The control unit is rated at 11.5kVA with a 2 second overload capability of 23kVA using pulse mode. All metering is digital and a memory facility is provided to hold the current reading when the output trips or is switched off. The current is switched by a solid state device and is automatically switched off when the device under test trips.
The PCU1-SP systems have a high accuracy timing system, allowing timing tests to be carried out to a resolution of 1ms. Selection for normally open or normally closed contacts is automatic, and the status of the contacts is shown on the front panel. Timing modes are available to test under and over current devices, re-closers, under and over voltage devices, current trips and circuit breakers.
A full range of high current output leads are available to complement the system in a range of lengths.
WEIGHT 26 kg
DIMENSIONS 450 × 275 × 305 mm
SUPPLIED ACCESSORIES Operating manual
Mains lead
Spare fuse set
OPTIONAL ACCESSORIES Trolley mounting system, Part no A204-0005
100ADM-F, Part no. 006
100AL MK2 / MK3 Lead Set, Part no. A199-0003
eKAM is the new fully automatic electronic primary injection test equipment. e KAM test system includes two portable units: one control unit with a la...
T 3000 is a primary current injection testing system designed to perform primary tests requested in substations commissioning. It allows to perform di...
DRTS 3 PLUS power system simulator is designed to give the highest accuracy when testing and calibrating protective relays, energy meter, transducer a...
Druckkalibrator mit einer Genauigkeit von 0.02%, Möglichkeit für einen zweiten Drucksensor
The Traqc-9 P is the best solution for each pressure calib...
Main features
Multi-tasking relay test equipment designed for testing protection relays, energy meters, transducers
Output: 6×15 A (80 VA); 4×300 V ...
FULLTEST 3 wurde für die Sicherheitsprüfungen und CE-Zertifizierung von elektrischen Geräten, Anlagen und Schaltschränken gemäß den Richtlinien der EN...
STS 5000 is a multifunction substation maintenance & commissioning test system for current, voltage and power transformers designed to perform primary...
STS 5000 is a multifunction substation maintenance & commissioning test system for current, voltage and power transformers designed to perform primary...
eKAM is the new fully automatic electronic primary injection test equipment. e KAM test system includes two portable units: one control unit with a la...
T 3000 is a primary current injection testing system designed to perform primary tests requested in substations commissioning. It allows to perform di...
DRTS 3 PLUS power system simulator is designed to give the highest accuracy when testing and calibrating protective relays, energy meter, transducer a...
Druckkalibrator mit einer Genauigkeit von 0.02%, Möglichkeit für einen zweiten Drucksensor
The Traqc-9 P is the best solution for each pressure calib...
Main features
Multi-tasking relay test equipment designed for testing protection relays, energy meters, transducers
Output: 6×15 A (80 VA); 4×300 V ...
FULLTEST 3 wurde für die Sicherheitsprüfungen und CE-Zertifizierung von elektrischen Geräten, Anlagen und Schaltschränken gemäß den Richtlinien der EN...
STS 5000 is a multifunction substation maintenance & commissioning test system for current, voltage and power transformers designed to perform primary...
STS 5000 is a multifunction substation maintenance & commissioning test system for current, voltage and power transformers designed to perform primary...